Home > Hardware >

  Kanthal A-1 Resistance Wire
Kanthal Resistance Wire for Rebuildable Atomizer


 
$3.99

Quantity in Stock:1480
Product Code: KANTHAL-WIRE


Coil Gauge*:
  

Coil Length*:
  

Qty:  
Description
 
Kanthal A-1 resistance wire is now available in 8 different gauges right here at Mountain Oak Vapors! 22 AWG, 24 AWG, 26 AWG, 28 AWG, 30 AWG, 32 AWG, 34 AWG, and in .8 ribbon wire. Available in 3ft and 15ft lengths (approximate).

Maximum continuous temp- 2550 degrees F

Wire Gauge - 0.8 x 0.4 Ribbon Wire (equivalent to 28 AWG round wire)
Resistance - 5.76 ohm/ft 17.28 ohm/m
Size - 0.8 x 0.1

Wire Gauge - 22 AWG
Resistance - 1.31 ohm/ft 3.93 ohm/m
Wire Diameter - 0.0253 mm

Wire Gauge - 24 AWG (Temporarily Out Of Stock)
Resistance - 2.07 ohm/ft 6.21 ohm/m
Wire Diameter - 0.0201 mm

Wire Gauge - 26 AWG
Resistance - 3.21 ohm/ft 9.63 ohm/m
Wire Diameter - 0.40 mm

Wire Gauge - 28 AWG
Resistance - 5.6 ohm/ft 16.8 ohm/m
Wire Diameter - 0.32 mm

Wire Gauge - 30 AWG
Resistance - 8.3 ohm/ft 24.9 ohm/m
Wire Diameter - 0.26 mm

Wire Gauge - 32 AWG
Resistance - 14.53 ohm/ft 43.6 ohm/m
Wire Diameter - 0.008" / 0.20 mm

Wire Gauge - 34 AWG
Resistance - 26.7 ohm/ft 80.3 ohm/m
Wire Diameter - 0.16 mm


Average Rating: 4.5 of 5 | Total Reviews: 51 Review this product! »

  0 of 0 people found the following review helpful:
 
To Expensive July 19, 2015
Reviewer: CM from Knoxville, TN United States  
Wire is wrapped on a plastic thing obliviously from a larger spool. Price is more for less. VaporBeast sells there wire for a few cents less but you get a 30ft spool. So for serious coil makers or for making a Clapton this is a wast of money spending more for less. I would love to support my local vape shop but its to expensive for everything from wire to liquid. I would rather pay less for vape gear so i can buy more. Its true less is more.

Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
Use to rebuild my Kanger atomizers October 23, 2014
Reviewer: Jaja from Story City , IA United States  
Good Product.  Only complaint (and its so minor I don't know if I could use the word complaint) is the Kanthal was rolled up.  Needs to be on a spool to avoid kinks when unwrapping, but as I said, very minor detail.

Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
Kanthal October 3, 2014
Reviewer: Ryan Montgomery from Oro Valley, AZ United States  
Kanthal wire is pretty standard and yes I'm commenting on wire!  This wire is grade A with impeccable extrusion exceeding AWG standards with minimal flaws.  After building several coils I ran the wire through my megger even though there is no insulation. Also it supported a low 500V @ 10amps for 2 hours before failure. Obviously that test is not for vaping by any means, you would catch everything on fire and destroy all your equipment, plus 2 amps doesn't play well with the human body. ha!

Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
Wire is wire. September 25, 2014
Reviewer: Rick Jackson from Chatsworth , GA United States  
What can I say, it's wire and it works.

Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
Was expecting more May 23, 2014
Reviewer: Calvin Alderete from Durham, CT United States  
Your website showed a large coil in the pic and I was kinda expecting that not the little paper spool I got. Satisfied w the product, just was expecting more packaging. Was the proper amount and everything but yea

Was this review helpful to you?

View All Customer Reviews